Does cold weather affect a lipo’s performance

LiPo batteries are also known as lithium-ion polymer batteries. These kind of gens ace lipo batteries are rechargeable or secondary cell batteries. They are commonly utilized in phones, but can also be used in radio-controlled planes and other smaller electronics. These batteries may also be used someday to power electric cars.

Cold weather affects lipos, like other batteries, you will probably capacity to be down, and therefore duration to be down. If your model is set up to direct cooling air over the lipos in the summer then it’ll supercool them in the winter time, unless you make a change. What I do is to put aluminium tape over the inlet ducts that are there to provide that cooling air.

The Lipos themselves sit in a Liposack, with a number of chemical handwarmers to keep the worst of the chill off. One of those will give about 30 minutes of decent heat and so four of them last about as long as I want to be out in the very low temperatures. On returning home the crystallised chemical handwarmers are warmed up in a pan of boiling water up and they then revert to their liquid state for the next time .

There is a way to get more performance out of a LiPo battery; optimize the Starting Temperature. LiPo batteries have an “ideal output temperature”. The internal resistance is at its lowest when they’re ran with a starting temperature of around 100°F (38°C). A pack at a temperature of less than 50°F (10°C) (very cold pack) can show noticeably poorer performance until it warms up with use. In the winter time or in cold climates, it’s best to store packs in a heated indoor living space. For outdoor use in cold climates, you should pre-warm your packs to 90-100°F (32-38°C) before using them. But remember, 140°F (60°C) is the maximum safe temperature, and the pack’s temperature will increase when it’s used, so be careful not to pre-warm the pack up too much.

Tips for your Lipo batteries

There are a couple effective ways to do this. The most effective is to find a square heating pad that you can place in your battery bag at the bottom. The only issue here is you will need a power source, not always a choice when out on location.

The second method is the method I’ve used when I don’t have access to the generator or another plug in. These tire heaters work perfect to plug into a small lipo 5000mah and keep the batteries warm. Simply place your batteries on top of each element and choose a heat that won?ˉt melt the plastic. Also don’t forget to keep an alarm on the Lipo batteries

Disclaimer: you must make sure to attach the sensor to one of the pads so they don’t run on full power not stop. To do this, just poke two small holes through one of the pads and zip tie the sensor to it so it’s secure.This will help keep your batteries warm while out in weather normally too cold for Lipo batteries.

Best RC Lipo Battery for cold weather

Now available from Genstattu, a collection of high capacity, high drain, hard case LiPo batteries specially designed for use in RC cars and models where extreme power and rugged reliability is a must.

With discharge rates of 90-100C, capacities ranging from 4800-6000mAh and in a range of configurations the Extreme Track LiPo range comes as standard with Overlander’s unbeatable quality, true extreme power and excellent value for money.

Available now; a 4800mAh 2S 7.4v 90C Shorty pack, a 5800mAh 2S 7.4v 90C Saddle pack, and a 6000mAh 1S 3.7v 100C, all provided with tubes and necessary cabling!

This will help keep your batteries warm while out in weather normally too cold for Lipo batteries. Good luck, respond to the post with any questions!

Comments

What You Should Know about Lipo Batteries Packs

Battery choice is import for both electric and nitro vehicles. They both need batteries to operate. In a eclectric vehicle the batteries propel the vehicle and power the steering. In nitro vehicles the batteries power the steering and throttle servos while the nitro or gas engine propels the vehicle.
gens ace 4000
Gens ace 4000mAh Lipo
In electric vehicles, the choice comes down to NiCd, NiMh and Lipo battery packs. NiCd and NiMH batteries have long been the workhorse of electric vehicles. They are simple to charge, maintain and also tend to have long lifespans. These batteries however have been steadily losing popularity to Lithium Polymer (Lipo) batteries. Lipo batteries tend to require more maintenance and special charging methods but offer users a more exciting experience with their perfromance. According to the Lipo voltage, Lipo batteries can divided ino to 3.7V lipo, 2 cell lipo battery, 11.1V, 14.8V and other type of batteries. These batteries are all common voltage we can see in the market.
Lipo batteries have revolutionized the capabilities of electric models in this hobby. One key example vehicles at extremely affordable prices such as Traxxas’ XO1 model which is a ready to run vehicle capable of traveling at 100 mph right out the box without any modification or Proboat’s Miss Geico 29 and Blackjack 29 which are capable of traveling at speeds of over 40 mph across the water. Here we can recommend you gens ace RC airplane battery , all batteries are tailored for various scales of the RC Models such as electronic cars, nitro cars, aero planes, vessels and also other models, toys, electric tools, electric bikes, electric autos, digital products etc.
Lithium Polymer (LiPo) batteries need to be charged only with a LiPo compatible Charger. Most LiPo batteries have two wires and connectors. One wire is the main wire which is used to connect the battery to the vehicle and charger. The other wire with the small white plug is the balance cord. The balance cord is used to charge each cell of the battery evenly. Lipo batteries require more care than conventional Nicd and NiMh batteries. To prevent damage to the battery it is recommended to never leave LiPo batteries connected to the vehicle or the charge when not in use. This can drain the battery down to a voltage in which you will be unable to charge the battery again.
Many but not all electoronics speed controls have low voltage cutoffs to prevent the batteries in the model from draining down below the preset voltage threshold that will damage your lipo battery. To prevent damage to the battery it is also recommended to never leave LiPo batteries connected to the vehicle or the charger when not in use. In an abundance of caution it is also a good idea to charge and store LiPo batteries in a flame retardant LiPo charging sack.

Comments